SUPER EASY DIY WAINSCOTING

his DIY wainscoting project is my favorite home renovation project that we have done. It’s been a long time coming and I can’t wait to share the results.

 

I’m not quite sure where to begin, I guess the beginning is always a good start. When we purchased this house in March and I knew that it was the perfect place to add some DIY wainscoting. We started the wainscoting in the hallway and the main living room back in the spring and then life happened. We didn’t complete the last room until the end of November. I’m so relieved that it’s finally done.

DIY Wainscoting renovation. I never thought installing wainscotting would be so easy. Here is some great inspiration! (Color: Benjamin Moore Cloud White.)

ANONYMOUS SURVEY

Which of the following financial and risk companies are you aware of?

DIY WAINSCOTING

This post contains affiliate links for your convenience. 

 

DIY Wainscoting renovation. I never thought installing wainscotting would be so easy. Here is some great inspiration! (Color: Benjamin Moore Cloud White.)

This project is easy, but it drags on. After the boards go up, that’s when the work begins. Puttying, sanding, caulking, and painting. All four of those tasks are at the bottom of the favorite pile and (naturally) that is what I was in charge of with this wainscoting project. Wainscoting or board and batten? Honestly, I’m not sure. I have called it both.

DIY Wainscoting renovation. I never thought installing wainscotting would be so easy. Here is some great inspiration! (Color: Benjamin Moore Cloud White.)DIY Wainscoting renovation. I never thought installing wainscotting would be so easy. Here is some great inspiration! (Color: Benjamin Moore Cloud White.)Another before and after. 

WAINSCOTTING SUPPLIES

Since our rooms will be different sizes, I can’t say how many you will need.

  • 3.5″ x .5″ primed boards (top piece and separators)
  • 5.5″ x .5″ primed board (baseboard)
  • Nail gun
  • 1 3/4 ” nails
  • Paintable caulk + caulking gun
  • Putty 
    • I like this one because it goes on pink and dries white.
  • Sanding blocks
  • Paint – I used Benjamin Moore’s, Cloud White.
    • My walls in the main living room is Revere Pewter, the hallway is Classic Grey.

RANDA’S TIP:I used both the Ben line and the Aura line in my rooms. Go withAURA. You save so much time.

HOW I DID IT:

Spacing

Floor to top of wainscoting: 36″

Spacing in between: 24″

In all honesty, I have to just say we wung it. We didn’t do anything formally, we put up the boards, decided what looked good to us and went for it. That was the most difficult part of this wainscoting project: going for it. PS -> not everything is perfectly 24″ in between, there were a few we had to adjust.

DIY Wainscoting renovation. I never thought installing wainscotting would be so easy. Here is some great inspiration! (Color: Benjamin Moore Cloud White.)

DIY Wainscoting renovation. I never thought installing wainscotting would be so easy. Here is some great inspiration! (Color: Benjamin Moore Cloud White.)

Caulking is the savior of this project. As you can tell with the above two photos, it fills the cracks and makes everything look seamless. Use the putty on the nail holes (and any dings in the walls or the wood) and fill the gaps and cracks with caulk (just make sure it’s paintable).

DIY Wainscoting renovation. I never thought installing wainscotting would be so easy. Here is some great inspiration! (Color: Benjamin Moore Cloud White.)

In both living rooms, the Cloud White wainscotting is paired with Benjamin Moore’s Revere Pewter. In the hallway, it’s paired with Classic Grey (see above photo).

I hope this post made sense! It’s hard for me to put into words what I did, but I wanted to give you the dimensions and tell you my secret: JUST DO IT! Go for it, and try to have fun doing it.

 

Leave a Reply

Your email address will not be published. Required fields are marked *