What exactly is this Ban Roll?
It is a kind of waistband interfacing tape which is very stiff (looks like highly starched) that won’t curl or roll and is crush-proof. They say that it’s made of 58% nylon/ 17% rayon/ 15% polyester/ 10% thermoplastic resin but it’s woven quite loosely. It’s mostly used in sewing waistbands to make them rigid and keep their shape. The width of the tape can vary. You can see very clearly threads that form the tape interlacing to one another at right angles. The threads can be easily peeled away to make a frayed edge that will be pulled out after stitching.
Where to buy the Ban Roll tape?
I never saw it in small local sewing shops, I bought mine in a Canadian store – Fabricland – but after that I found it on Amazon. So here is an affiliate link if you decide to buy it for hemming chiffon. I am pretty sure you will need it if you sew garments from silk. It will revolutionize your sewing skills.
Here are the steps how to use the Ban Roll tape for making narrow hems
MORE POPULAR ARTICLES FOR BEGINNERS
Step 1. Prepare a piece of Ban Roll tape for making the narrow hem
Measure your hem length and cut a piece of Ban Roll tape a little bit longer than your hem. Cut the very edge thread of the tape lengthwise – just one thread at the edge where it’s woven a little tighter than other threads.
Using a pin or a seam ripper pull out a few threads lengthwise – it can be 3-5 threads (it depends on how wide you want to make your hem). The threads going across the tape have to be pulled out while the threads on the downside of the tape are left to form the frayed effect. The width of the frayed edge will be equal to the width of your hem.
Step 2. Place the Ban Roll on the fabric
Place the prepared Ban Roll on the right side of the fabric aligning the frayed edge with the edge of the fabric. Use special pins for silk fabric – they are very thin and sharp and will not make any holes in the delicate silk chiffon.
You don’t need to place the tape at the very edge of the fabric though. You can keep some distance from the fabric edge (like ¼ or even ⅜ inch) if you want to make sure that stitches will catch the chiffon fabric, but later you will need to trim off the excess fabric.
Place the Ban Roll all around the hem and when you come to the starting point overlap it a little bit ( that’s why we cut it a little longer ).
Step 3. Stitch over the frayed edge of Ban Roll
Stitch over the frayed edge along the length of the hem making sure you don’t catch any lengthwise threads that are not frayed.
Stitch length should be 3.5 – 4 mm, and I usually put tension to 0 on my sewing machine because I will take out these stitches later.
Step 4. Sew the hem
This method also does corners really beautifully! It can be used not only for straight hems but for slightly curved.
So, what do you think about this amazing technique? Now all you need is a source for the Ban Roll tape.